This directory has been established by ECI to inform the public of member products and professional services. The directory is not a complete listing of ECI membership, but only represents participating ECI members. Companies listed in bold letters are Corporate (Voting) members of ECI. Associate Members are listed in plain type.

Disclaimer:
The following product and service information was provided by the respective ECI members participating in the directory. The products and services listed are not an endorsement or recommendation by ECI of member products or services. ECI makes no warranty, implied or stated, as to member services or products.

Evaporative Cooler Manufacturers
Adobe Air, Inc.
Bessam-Aire, Inc.
Phoenix Manufacturing, Inc.
PROTEK CC
Quietaire Cooling, Inc.
Reznor / Thomas  &  Betts
SPEC-AIR
United Metal Products Inc 		Evaporative Coolers Component Manufacturers
Glacier-Cor Products / PACTIV Corp.
Munters Corporation

Consulting Engineering
Robert Foster
John R. Watt, Ph.D.


Adobe Air, Inc
Larry Hansen
Vice president, R&D
500 S. 15th street
Phoenix, Arizona. 85034
Telephone (602) 256-4755
Fax (602) 271-9467
Email: lhansen@adobeair.com
Web site: www.adobeair.com		 A complete line of ducted residential and industrial evaporative coolers with both Excelsior and rigid cellulose media. Indirect cooling modules can be added to all master cool models for the highest efficiency available in evaporative technology.

The residential line of coolers also includes a full range of window mounts in addition to portable or spot coolers models for personal comfort applications.
Bessam-Aire, Inc.
Hugh Baxley
President
PO Box 391525
Cleveland, Ohio. 44139-1525
Telephone: (440) 439-1200
Fax: (440) 439-1625
Email: bessam@bessamaire.com
Web site: www.bessamaire.com
  • Direct evaporative coolers from 8,000 cfm to 100,000 cfm
  • Indirect evaporative coolers
  • Direct Gas Fired Make-up air units to 100,000 cfm
  • Combination heating & cooling units
  • Custom air handlers with chilled water, DX, steam or hot water coils
    • Phoenix Manufacturing, Inc.
    Robert K. Drudge
    Director Technical Compliance & Warranty
    3655 E Roeser Road
    Phoenix, Arizona. 85040
    Telephone: (602) 437-1034
    Fax: (602) 470-8420
    Email: bob_drudge@phxmfg.com
    Web site: evapcool.com and 
    dualairadvantage.com    		 Full line of both standard and single inlet type evaporative coolers in residential and commercial sizes as well as a complete line of service parts, pumps, motors and Power Cleaning systems.

    Also, makers of Dual Air systems, combination heat pump / evaporative cooling residential sized product.
    PROTEK CC
    Neels Claassen
    Professional Engineer
    PO Box 1963
    Halfway House, Rep. of South Africa. 1185
    Telephone: + 2711 464 1752
    Fax: + 2711 464 1753
    Email: protek@global.co.za
    Web site:     		 PROTEK CC carries a USA patent on a new concept 2 Stage  Evaporative Cooler with Integral Cooling Tower resulting in an external small footprint, which has been commercialized successfully in Southern Africa since 1989. Three heat exchange processes give rise to Supply Temperatures well bellow Ambient Wet Bulbs resulting in high EERs.

    Standard, off the rack, reliable components are utilized creating low cost, high cooling efficiency systems in sizes varying from 4,000 to 80,000 cfm.

    Units have been applied successfully to several industries.
    Quietaire Cooling, Inc.
    Edd A. Farley
    Director of marketing
    505 N. Hutcheson
    Houston, TX. 77003
    Telephone: (713) 228-9421
    Fax: (713) 228-9425
    Email: info@quietaire.com
    Web site: www.quietaire.com    		 Quietaire Cooling Inc, is a subsidiary of Quietaire Corporation, manufacturers and markets a full range of portable evaporative coolers under the brand name QuietCool. Currently QuietCool portable evaporative coolers come in two sizes:  a 36"  fan blade (5 models, including on for hazardous locations) and an 18" fan blade. These portable evaporative coolers are the result of over 60 years manufacturing industrial / commercial fans and ventilation equipment and over 40 years manufacturing evaporative cooling systems for the greenhouse industry. The original portable evaporative cooler went into production in 1980.

    QuietCool portable evaporative coolers are known for their Industry Standards setting position. "Cool Blue" Quiet Cool portable evaporative coolers can drop the temperature up to 20 degrees F. Cool off your world  today  with the "Fan Maker's"  cooler, QuietCool!
    Reznor / Thomas  &  Betts
    David Street
    VP marketing
    8155 T&B Blvd.
    Memphis, Tennessee. 38119
    Telephone: (901) 252-5000
    Fax: (901) 252-1305
    Email: david_street@trc.com
    Web site: www.reznoronline.com
  • Evaporative cooling
  • Space heating, gas, oil, electric, hydronic
  • Total outside air conditioning
  • Reznor includes a very broad line of specialty HVAC products, including ventilation
  • Reznor products are manufactured in USA, Mexico and Belgium, and distributed worldwide.
    • SPEC-AIR
    Stephen  L. Callaham
    President
    Box 509
    Canutillo, Texas. 79835-0509
    Telephone: 1-800-288-0892
    Fax: (915) 886-5851
    Email: specair21@cs.com
    Web site: www.specair.net    		 Spec-Air (Special Performance Engineering Capability) engineers, manufacturers, markets, distributes and services industrial / commercial air side products. In addition to a standard product line, which includes condenser pre-coolers (sized for standard packaged units as well as custom built for industrial chillers) and dehumidification / reheat systems, Spec-Air fabricates complete custom air handlers as well as indirect / direct evaporative cooling modules and enhancements for packaged air conditioners built by Trane, McQuay, Reznor and York. Most recently Spec-Air has added industrial direct fired gas furnace sections to its product line and an all stainless steels packaged rooftop direct evaporative cooler (GL ACER) designed for commercial and industrial applications.

    At the core of Spec-Air's unique product line is the Stage II Indirect Evaporative Cooling Module which provides the flexibility of being a stand-alone ducted module, and energy recovery system for packaged rooftop units (ACER), and as the dry plate exchanger in a dehumidification / reheat curb (Spinner). The Stage II, which can be combined with Stage I Direct Evaporative Washer, produces the cooling section for Spec-Air's SPEC and Spectrum custom industrial air handlers.
    Spec-Air has a nationwide representative and service network which is fully supported by factory engineers as well as a service and parts department.
    United Metal Products Inc
    1920 E. Encanto Dr.
    Tempe, Arizona. 85281
    Telephone: (480) 968-9550
    Fax: (480) 968-9555
    Email: sales@unitedmetal.com
    Web site: www.unitedmetal.com    		 United Metal Products is the industry leader in strategic design and development of the highest quality custom evaporative cooling and air handling equipment on the market today. Forged in one of the harshest desert climates in the world and from a family of evaporative cooling pioneers, United Metal Products has worldwide installations and applications of commercial and industrial heating and cooling air handling equipment. A state-of-the art 96,000 square foot facility along with personalized service and conservative time tested methods have earned UMP a reputation as a company of cutting edge innovative manufacturers of quality heating and cooling air handling equipment. All product lines are fully supported by factory engineers as well as a complete service and parts department. Visit
    www.unitedmetal.com for complete product line information.

    Glacier-Cor Products / PACTIV Corp.
    James A. Meyer
    Product manager
    4300 N. Miller Rd. Suite 243
    Scottsdale, Arizona 85251
    Telephone: (480) 947-2128
    Toll free: 1-800-492-2662
    Fax: (480) 947-2258
    Email: jmeyer@pactiv.com
    Web site:     		 Manufacturer of cellulose evaporative cooling pads for agricultural, horticultural, commercial, industrial, and residential applications.
    Munters Corporation
    Pat Thomas
    Senior Engineer
    P. O. Box 6428
    Ft. Myers, Florida. 33911
    Telephone: (914) 936-1555
    Fax: (914) 936-8858
    Email: pat_thomas@munters.com
    Web Site: www.muntersamerica.com    		 Munters HumiCool division is the world leader in evaporative cooling and humidification. Munters pioneered the cross-corrugated evaporative media CELdek® which is used around the world for cooling poultry buildings, green houses, homes, offices, factories and computer rooms. It has an unsurpassed reputation for durability, performance and reliability. GLASdek® is a fire-rated evaporative media which is recommended for cooling and humidifying GAS turbines and HVAC systems. Both are available with MiTedg or TuFedg cleanable edge coatings.

    Robert Foster
    Project Engineer
    Southwest Technology Development Institute
    College of Engineering
    New Mexico State University
    PO Box 30001, Dept. 3SOL
    Las Cruces, New Mexico. 88003-8001
    Telephone: (505) 646-1846
    Fax: (505) 646-3841
    Email: rfoster@nmsu.edu
    Web Site:     		 Analysis and design of direct and indirect evaporative cooling systems. Performance testing of evaporative cooling equipment and components. Data acquisition and field monitoring of evaporative cooling systems. Building simulation modeling of direct and indirect evaporative cooling and development activities for evaporative cooling. Provide training and workshops (English and Spanish) on evaporative cooling technologies.
    John R. Watt, Ph.D.
    Evaporative Air Conditioning Writer
    300 Camden Rd. NE.
    Atlanta, Georgia. 30309
    Telephone: (404) 351-3588
    Email:
    Web Site:    		 Author of:
  • Evaporative Air Conditioning (1963)
  • Evaporative Air Conditioning Handbook (1986)

    Co-author of
  • Evaporative Air Conditioning Handbook (1996)
    • Developed by ZEMA.